ATEX TURBOLITE
The ATEX Turbolite is a high power compressed air driven lamp for use in potentially explosive atmospheres and meets EN 1127 'explosion prevention and protection’ in Europe.
-
Bay light ATEX Turbolite
-
Floodlite ATEX Turbolite
Product Information
A-TL44A, A-TL44B, A-TL45A, A-TL45B
ZONES: 1, 2, 21 AND 22
Wolf airlamps provide illumination for shotblasting, cleaning and coating of storage tanks and vessels and pipeline and structural engineering activities, offering a safer alternative to mains and low voltage lighting where explosive atmospheres present a serious risk to the workforce. Light models include: Bay provides a high level of all-round general illumination and Flood has a matt reflector giving a wide-angle diffused beam. Available in aluminium (A) or brass (B), usable in gassy mines and all lamps are nickel plated to protect against corrosion and are supplied with a bridle and safety hook fitted.
The ATEX Turbolite is powered, purged, pressurised and cooled by compressed air controlled by an integral regulator, which passes through the lamp head and drives the turbine wheel by means of three nozzle plates. The turbine drives a magnet rotor within windings, generating the 24 Volt ac electrical supply which powers the 250 Watt halogen bulb. Major improvements over other models, include sealed bearings, refined regulator, greater use of stainless steel components, bulb-life enhancing device and silencer with a particle trap.
Special certification conditions: clean, dry compressed air and anti-static air hose are used to operate the lamp to minimise contamination inside the lamp and dangerous accumulation of static electricity and in potentially explosive dust atmospheres a ‘remote exhaust’ must be used, exhausting air to the safe area. Accessories available include anti-static hoses, filters and stands, tripods, setting and testing devices.
-
Power Source
Safe Compressed Air Power
-
Certified
ATEX Certified for use in Hazardous Areas
-
Ease of Application
Full Accessory Range
Features & Benefits
LIGHT OUTPUT/DURATION/POWER
- 6000 / 9000 lm output depending on air pressure (5.0 - 8.0 bar)
- 250 watt Halogen light output
- 360° bay or flood light beam options available
CERTIFICATION
- CE marked to ATEX Directive, for use in zones 1 and 2 Hazardous Areas
- Dust ignition protected for zones 21 and 22 using remote exhaust
- Group I Mining approval with alternative brass construction
- Once pressurised may be used underwater* (view technical table for full ingress protection information)
FEATURES
- Aluminium super-lightweight construction
- Safe compressed air power source
- Re-designed for greater reliability
- Fitted with stainless steel exhaust silencer
- Range of accessories available
- Safe alternative to mains and low power lighting solutions where explosive atmospheres present a serious risk to the workforce
A-TL44A
Gas Zone: 1 and 2
Dust Zone: 21 and 22
Power: Air
Light: Bay - Aluminium
A-TL44B
Gas Zone: 1 and 2
Dust Zone: 21 and 22
Power: Air
Light: Bay - Brass
A-TL45A
Gas Zone: 1 and 2
Dust Zone: 21 and 22
Power: Air
Light: Flood - Aluminium
A-TL45B
Gas Zone: 1 and 2
Dust Zone: 21 and 22
Power: Air
Light: Flood - Brass
| Product Reference | A-TL44A | A-TL44B | A-TL45A | A-TL45B | |
|---|---|---|---|---|---|
| Product Description | Safety Bay Light, Compressed Air Powered | Safety Flood Light, Compressed Air Powered | |||
| Code | ATEX | II 2 GD II T4 (Tamb = 55°C) T135°C | |||
| Mining | - | I M2 | - | I M2 | |
| FM | Class 1 Div 1 Groups A, B, C, D. T4 Ta = 55°C | ||||
| Apparatus Standards | EN1127-1: 2011 | ||||
| Type of Protection | Technical File | ||||
| Area of Class (Gas) | Zones 1 and 2, Gas Groups IIA, IIB, IIC | ||||
| Temp. Class (Gas) | T4 | ||||
| Area of Class (Dust) | Zones 21 and 22 | ||||
| Max Surface Temp. (Dust) | T135°C | ||||
| Ambient Temperature | -20°C to +40°C | ||||
| Certificate | SIRA02ATEX5099X | ||||
| Enclosure | Aluminium | Brass | Aluminium | Brass | |
| Lens | Lens Ball Glass/Plastic Dome | Toughened Glass (15mm) | |||
| Beam Type | All-around 360°C Illumination | Flood | |||
| Light Source: | Part Number | A-129 (as standard) / A-159 (alternative) | |||
| Type | Halogen Filled Filament Bulb | ||||
| Volts | 24v | ||||
| Watts | 250w | ||||
| Output | 6000 lm/9000 lm | ||||
| Life | 2000 hrs/200 hrs | ||||
| Power Source: | Type | Compressed Air Driven Turbo-alternator | |||
| Air Pressure | 5.0-8.0 bar | ||||
| Consumption | 0.75m³/min | ||||
| Ingress Protection | Once pressurised may be used underwater. When using under water always start lamp before submersing and ensure lamp is running until removed from water, an additional accessory can be fitted allow an exhaust hose to be fitted to either have the exhaust air away from the lamps or piped to the surface. Depth of use limitations to be considered regarding water pressure. | ||||
| Weight | 5.5kg | 9.4kg | 7.1kg | 13.5kg | |
- All information has been gathered under laboratory conditions, the user must regard the values given as approximate.
- Changes may be made to the above specification without notification, details are available on request.
Light Output Diagrams
A-TL44A/B - Ball Glass
Peak luminous intensity at 2.5m 70lux
A-TL45A/B - Matt Reflector
Flood Beam (approx 25°)
Peak luminous intensity at 5m 950lux
Product Dimensions
Got a question?
Want to learn more? Just contact us and we’ll be more than happy to help!